Is The H100I Compatible with LGA 1200? (Answer Explained)

Overclocking a gaming computer’s processor is an ideal way to boost gaming performance. But it also causes overheating on your gaming computer processor and to prevent further permanent damages, you will need the best performing liquid cooling device like the H100i.

But the main question here is whether the H100i is compatible with the latest released intel microprocessor socket LGA 1200 or not because without knowing this detail, you cannot use that liquid cooler.

Although it was not mentioned in the latest released H100i model’s spec list, all H100i models are compatible with LGA120, andwhy I am confidently stating that, find out in today’s article along with other relevant details.

What Is H100I?

The H100i is one of the best-performing cooling devices delivered by the CORSAIR brand.

For more than 25 years, Corsair has been a trusted name for offering the most powerful CPU cooling devices with its “H” or Hydro series.

These cooling devices complement Intel®’s newly released powerful processors with an extreme level of compatibility and stunning performances.

Currently, three different versions of the H100i liquid CPU cooler are available for intel compatible processors-

iCUE H100i RGB PRO XT Liquid CPU Cooler
Hydro Series™ H100i RGB PLATINUM 240mm Liquid CPU Cooler

Hydro Series™ H100i RGB PLATINUM SE 240mm Liquid CPU Cooler

If you are interested in learning more details of each of the H100i extreme performance liquid cooler models or would like to make an online order placement, kindly visit https://www.corsair.com/us/en/Categories/Products/Liquid-Cooling/.

What IS LGA1200?

It is an Intel microprocessor-compatible socket, and Intel corporation officially released the LGA 1200 in Q2 2020.

This socket is a land grid array mount paired with 1200 protruding pins to connect with the processor pads.

This latest released microprocessor compatible socket is designed as the perfect replacement for LGA 1151 or the “Socket H4” and is compatible with 10th generation Comet Lake and11th generation Rocket Lake desktop CPUs.

How Does The H100i Work?

Generally, the CORSAIR Hydro Series H100i coolers are referred to as Closed Loop (Water) Coolers or CLC type of CPU coolers.

These CPU coolers mainly work by changing the 2-step air cooling method into a 4-step cooling method and do not blow hot air like the air coolers.

In this case, the liquid of the H100i cooler transfers the heat to the CPU’s radiators and efficiently blows the heat out of the CPU case.

Is The H100I Compatible with LGA 1200?

This confusion was mainly raised among most users after the release of LGA 1200 because H100i series coolers were released before the launch of this new socket release of Intel.

But, H100i series coolers are compatible with the 1151 socket.

Since Intel has designed the LGA1200 microprocessor socket as a substitute for the LGA1151, LGA 1200 also comes with similar socket dimensions as the previously released LGA 1151.

The only difference between these two is that the LGA 1200 has a different pin arrangement and has no bearing on the cooler fit.

However, based on the https://www.corsair.com/us/en/intel-z490 website declaration, this little issue will not affect the compatibility of CORSAIR H100i coolers.

How To Connect The H100i With The Motherboard?

To connect your H100i device to your CPU motherboard, attach the data cable’s mini-USB side to the water block.

Next, attach the USB header to your motherboard-free 9-pin USB 2.0 header.

Now, visit the Corsair download site and download the dashboard software so that you can operate and control your new H100i cooler.

How To Install The H100i Cooler?

To install any H100i cooler, thoroughly follow all the steps given below-

Step 1:

Start the task by adjusting the notches inward on the backplate microprocessor socket’s compatibility. Now, carefully push the standoffs through the motherboard’s backside. Then, insert silver standoff screws into the backplate.

Step 2:

Remember, you need to prep the radiator before installing it inside the case.

Therefore, use the long screws that come with your H100i device and attach both fans to the radiator by orienting the fan struts to the inside.

Step 3:

Now, carefully slide your new H100i cooler into the case’s Top and use the short screws, washers that came with the cooler to attach it to the case. It may also be easier to install the center screws first.

Make sure all the eight screws are securely installed.

Step 4:

Next, you need to remove the plastic protective cover to mount the cooling block. So, slide the cooling block onto the standoffs and by using the thumbscrews secure the block in place. Remove and replace the lug nuts on a tire.

Step 5:

After that, connect the pump power cables and fans securely. Now, attach the Corsair Link Data Cable’s mini-USB side to the water block and the USB header to your motherboard’s free 9-pin USB 2.0 header.

Finally, your new CPU cooler is ready to be operated and keep your Gaming computer protected from heating and other damages.

Is The H100i Cooler Any Good?

Are you looking for extreme cooling performance, which runs fans at much slower speeds than regular CPU coolers and even minimizes noise output then CORSAIR H100i cooling models are the ideal choice for you.

But why?

Because H100i models are developed by awesome iCUE software integration, equipped with powerful radiators & fans, and come sleek yet in space-conscious size.

Each H100i device has excellent cooling abilities, amazing RGB lighting, balanced size, and is also available at a fair price.

Which Type of Liquid Is Recommend For Using On Corsair H100i?

The expert recommendation for H100i is to use a combination of pre-mixed fluid with corrosion, biological, and scale inhibitors like the Corsair XL5 Performance Coolant for the best protection, performance, and longevity of your CPU cooling system.

What Are Top LGA 1200 Motherboards to Consider?

Let’s have a brief glance at the top LGA 1200 Compatible Motherboards of 2022-

ASUS Prime Z490-A LGA 1200 (Intel® 10th Gen) ATX Motherboard
MSI Z490-A PRO ProSeries ATX Motherboard
GIGABYTE Z490 Vision G Motherboard

Gigabyte H410M S2H Motherboard
ASROCK B460M PRO4 Supports 10th Gen Intel Core Processors Motherboard

Frequently Asked Questions (FAQs)

How Long Does the H100i Cooler Last?

Reportedly, the brand claims that each H100i cooler will at least last around five years without major issue.

Does The H100i Come with Thermal Paste?

Yes, H100i coolers come with thermal paste, so you do not have to apply the paste.

Does The H100i Come Pre-filled?

Reportedly, all Corsair H series cooling devices come in a pre-filled form, where a set of long tubes connected with the water block and pumps to the radiators.

Conclusion

For more than 25 years, CORSAIR has been a trusted name for offering top-quality PC build accessories, such as cases, keyboards, power supplies, and many more.

Even when the brand first officially launched its first liquid cooling device in2016, it did not disappoint and kept its uncompromising commitment to delivering quality products only.

After reading the entire article, what do you think is the H100i compatible with LGA 1200?